PACK NEWPRO

<heading-style-h2>PACK NEWPRO 80<heading-style-h2>

<heading-style-h6>Multi-function anchor <heading-style-h6>

Multi-function anchor consisting of a stainless steel plate and a ready-to-install matrix. The matrix features precision machining, allowing the cable to be oriented on either side. It is versatile and can be used both at the entry/exit points of a lifeline and as an intermediate anchor. The energy absorbed during sliding is exceptionally low.

<heading-style-h3>Assembly procedure <heading-style-h3>

1. Check the condition of the anchor support and the cable.
2. Proceed to place the plate on its support.
3. Position the 10 mm lifeline cable inside the aluminum matrix using the 6 bolts. Tighten until the plate stops, using a high-strength thread-locking adhesive.

<heading-style-h3>Installation advice <heading-style-h3>

Attention: the hook must be able to pass freely.
The lifespan of the equipment depends on the quality of the support and the environment.
A minimum inspection every 12 months is required.